HomeHome  PortalPortal  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  

Share | 
 

 Sand casting molding uses different types of sand

View previous topic View next topic Go down 
AuthorMessage
megan2008
experience soldier level 1
experience soldier level 1


Number of posts : 20
Registration date : 2013-10-26

PostSubject: Sand casting molding uses different types of sand   Thu Nov 14, 2013 5:40 am

Sand casting is one casting methodin the sand mold to produce castins,such as steel castings,gray iron castings and alloy castings.A sand casting or a sand molded casting is a cast part produced by forming a mold from a sand mixture and pouring molten liquid metal into the cavity in the mold.The mold is then cooled until the metal has solidified.In the last stage the casting is separated from the mold.There are six steps in this process:

Place a pattern in sand to create a mold.Incorporate a gating system.Remove the pattern.Fill the mold cavity with molten metal.Allow the metal to cool.Break away the sand mold and remove the casting.

The accuracy of the casting is limited by the type of sand and the molding process.Sand castings made from coarse green sand impart a rough texture on the surface of the casting,and this makes them easy to identify.Air-set molds can produce castings with much smoother surfaces.Surfaces can also be ground and polished,for example when making a large bell.After molding,the casting is covered in a residue of oxides, silicates and other compounds.This residue can be removed by various means,such as grinding,or shot blasting.

During casting,some of the components of the sand mixture are lost in the thermal casting process.Green sand can be reused after adjusting its composition to replenish the lost moisture and additives.The pattern itself can be reused indefinitely to produce new sand molds.The sand molding process has been used for many centuries to produce castings manually.Since 1950, partially-automated casting processes have been developed for production lines.

There are two main types of sand used for sand casting molding.'Green sand' is a mixture of silica sand, clay,moisture and other additives.The 'air set' method uses dry sand bonded to materials other than clay, using a fast curing adhesive.When these are used, they are collectively called 'air set' sand castings to distinguish these from 'green sand' castings.Two types of molding sand are natural bonded (bank sand) and synthetic (lake sand),which is generally preferred due to its more consistent composition.

With both methods,the sand mixture is packed around a master 'pattern' forming a mold cavity.If necessary, a temporary plug is placed to form a channel for pouring the fluid to be cast.Air-set molds often form a two-part mold having a top and bottom,termed Cope and drag. The sand mixture is tamped down as it is added,and the final mold assembly is sometimes vibrated to compact the sand and fill any unwanted voids in the mold.Then the pattern is removed with the channel plug, leaving the mold cavity.The casting liquid (typically molten metal) is then poured into the mold cavity.After the metal has solidified and cooled,the casting is separated from the sand mold.There is typically no mold release agent,and the mold is generally destroyed in the removal process.

valve casting: http://www.fotaichina.com/products/p290.html
Back to top Go down
View user profile
 
Sand casting molding uses different types of sand
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Spartacus Blood & sand free to air
» Sand rush Excadrill vs Uber status
» Red Troll and Trollish Types
» making molds for greenstuff casting
» Which Monster, which weapon

Permissions in this forum:You cannot reply to topics in this forum
 :: XP-Arena Public CS 1.6 Server :: Ban/Unban-
Jump to: